CC3 Software

You can get a feel for using the CC3 by running the actual software in it's demo mode. When in demo mode, the software does not try to communicate with the CC3 unit via the selected COM port. If you have any questions (or suggestions) please contact us.

If you would like to use the CC3 on other platforms or write your own software, this is easily accomplished as the CC3 utilizes a very straight forward ASCII command set for all configuration settings. Our Control Software converts actions on the user-friendly interface (shown below) into the appropriate ASCII commands to the CC3. If you would like more information about using the CC3 directly via ASCII commands, please use the contact information below to let us know.

Install CC3Ware software

Currently, and as improvements are made, the latest version of this software is available for FREE download from our on-line web site.

Contact Information

Telephone: 716-328-5850
FAX: 716-328-1144
Postal address: 200 Buell Road, Suite 9, Rochester, NY 14624
Electronic mail: rmi@frontiernet.net
Online Web Site: http://www.frontiernet.net/~rmi/