Elite pneumatics

DGALBRAI@CCIT.ARIZONA.EDU
06 Nov 1992 13:26:43 -0700 (MST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Gary.A.Ward@Dartmouth.EDU: "ACDU"
Previous message: ERIC MARTZ: "Identifying yourself"

We're having trouble with the sheath pressure: we call for sheath
pressure and the Elite responds with a pressure about 2psi lower than
requested, also unstable. We don't think we have leaks, or that the soft-
ware is playing up. Suggestion has been that valve VL1 is either dirty
or is malfunctioning. Question: does anyone know how to remove valve
VL1; also how do you clean it, and finally does anyone have any other
suggestions?

Thanks in anticipation! David Galbraith (Cytometry of Other Life Forms).

Next message: Gary.A.Ward@Dartmouth.EDU: "ACDU"
Previous message: ERIC MARTZ: "Identifying yourself"

CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the Purdue University Cytometry Laboratories and distributed free of charge as an educational service to the cytometry community. If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL, Purdue University, West Lafayette, IN 47907. Phone: (765)-494-0757; FAX(765) 494-0517; Web http://www.cyto.purdue.edu , EMAIL cdrom3@flowcyt.cyto.purdue.edu