Re: FACSort/PowerMac Link up

Jim Houston (jim.houston@stjude.org)
Thu, 13 Feb 1997 08:35 -0600 (CST)

When our FacsCalibur and Power Mac do not link and a restart on the Mac
does not work, we turn the power off to both. Then restart the
FacsCalibur wait 1 min then restart the Mac. This usually solves the
problem.

Jim Houston


Home Page Table of Contents Sponsors E-Mail Archive Web Sites

CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the Purdue University Cytometry Laboratories and distributed free of charge as an educational service to the cytometry community. If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL, Purdue University, West Lafayette, IN 47907. Phone: (765)-494-0757; FAX(765) 494-0517; Web http://www.cyto.purdue.edu , EMAIL cdrom3@flowcyt.cyto.purdue.edu